2024 Vermeer® Stump Cutters SC30TX

Information

2024 Vermeer® Stump Cutters SC30TX

The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.

Features may include:

Vermeer AutoSweep® system

AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.

Long tracks

Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.

Operator presence system

Control handle for the boom swing and boom raise/lower is equipped with operator presence capacitance-sensing handle. This system is intended to help protect the operator.

Smooth operation

The exclusive SmartSweep™ control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.

Hydraulically-driven cutter wheel and ground drive

The elimination of belts or chain drives reduces service and maintenance.

Photos

Highlights

  • Texarkana, Texas
  • 2024
  • Vermeer®
  • Stump Cutters SC30TX
  • ECH740
  • Control Station Description: Fixed-rear
  • Gas
  • Available
  • 35 in
  • 49 in

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC30TX
  • Stump
  • ECH740
  • Kohler
  • 2
  • Gross (Maximum): 25 hp
  • 42 ft-lb
  • 6 " (15.2 cm) 2-Stage dry
  • Spin-on
  • Medium: Air/oil
  • Track Drive: Geroter
  • Max Fuel Consumption: 2.4 gph
  • Gas
  • Lower: Hydraulic motor
  • Track: Hydrostatic
  • 405
  • System Voltage: 12 | Switches: Cutter wheel drive
  • Cutterwheel: 1110 rpm | High Travel: 3.2 mph
  • Pump Flow at Maximum RPM: 16 gpm | track: 11.4 gpm (43.1 L/min)
  • System relief: 2750 psi | track: 2900 psi (200 bar)
  • Soft Ground: 3.4 psi
  • Track Drive: Hydrostatic
  • System Type: Open loop
  • Control Station Description: Fixed-rear
  • Cutterwheel Diameter without Teeth: 16 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 35.5 in | Cutterwheel Cut Above Ground: 25 in | Cutterwheel Cut Below Ground: 12 in | Maximum Angle of Continuous Operation: 25 deg | Chip Containment: 2.2 cu ft
  • 94 in
  • 35 in
  • 49 in
  • Retracted: 35 " (88.9 cm) | Extended: 35 " (88.9 cm)
  • On Ground: 31.4 " (79.7 cm)
  • Tank: 6.8 gal
  • Tank: 9 gal
  • Oil Volume with Filter: 2 qt
  • 1550 lbs
  • Number of Teeth: 16 | Number of Indexes: 2 | Number of Pockets: 16 | Filtration Method: Inline return filter | Type of Idler: Cast | Number of Idlers: 5
  • Recommended Oil: Kohler oil or API CH4/SJ / hydraulic: ISO 68
  • Rubber 7 " (17.8 cm) width