2024 Vermeer® Stump Cutters SC48TX

Information

2024 Vermeer® Stump Cutters SC48TX

The Vermeer SC48TX stump cutter delivers high efficiency from engine to the stump grinding wheel through a 48-hp diesel engine with a direct drive system. This machine gives operators access to tight and challenging jobsites with a narrow footprint and low ground pressure to complete a variety of jobs. Plus, operators can add features like the remote control and backfill blade to help increase productivity.

Features may include:

48-hp (36-kW) diesel engine

The 48-hp (36-kW) diesel engine provides optimal fuel economy, durability and performance to efficiently cut stumps of all sizes. Backed by proven worldwide service and support to maximize productivity.

Direct-drive system

This direct-drive system delivers the maximum amount of power to the cutter wheel and requires minimal maintenance.

Vermeer cutting system

Enhance jobsite productivity with the Vermeer cutting system – a two-sided cutter wheel that minimizes recirculation of material and maximizes cutting performance.

Retractable tracks

The retractable tracks allow operators to navigate the machine through narrow jobsite entrances.

Photos

Highlights

  • Texarkana, Texas
  • 2024
  • Vermeer®
  • Stump Cutters SC48TX
  • Ultra-low sulfur diesel
  • Available
  • (tracks retracted): 35 in | (tracks extended): 49 in | Chip blade (without extensions): 34 in
  • (non-remote unit): 76 in | (remote unit): 85 in

Specifications

  • 2024
  • Vermeer®
  • Stump Cutters
  • SC48TX
  • Stump
  • CAT
  • C1.7
  • T4F/Stage V
  • 3
  • Gross Horsepower (Maximum): 48 hp
  • Torque (Max): 123 ft-lb
  • Dry-type, restriction indicator, evacuator valve and safety element
  • Spin-on
  • Medium Water/antifreeze
  • Max Fuel Consumption: 2.9 gph
  • Ultra-low sulfur diesel
  • Type Electric clutch with brake
  • Lower: Straight bevel
  • 2 universal joints | U Joints: 2 standard with double lip seal
  • Spring-applied and hydraulically-released dual parking brakes
  • 950 CCA
  • System Voltage: 12
  • Cutterwheel: 1235 rpm | High Travel: 1.5 mph | Low Travel: 1.1 mph | Low Travel: 100 ft/min | High Travel: 140 ft/min
  • 107 dB(A)
  • Filtration Method: Full-flow 4-micron return filter, suction strainer
  • Flow at Maximum: 11 gpm
  • System relief: 2900 psi | System Relief: 2900 psi | Ground Bearing Pressure - Soft Ground: 5.7 psi
  • Track Drive: Tandem gear pump, pressure balanced
  • Warning: Engine warning
  • Maximum Angle of Continuous Operation: 35 deg | Fan: 16.5 in | Cutterwheel Diameter: 24 in | Cutterwheel Thickness 1.4 in | Cutterwheel Straight Line Dimension: 65 in | Cutterwheel Cut Above Ground: 28 in | Cutterwheel Cut Below Ground: 16 in | Chip Containment 23 cu ft | Blade Travel Above Ground: 8.5 in | Remote Range: 300 ft (91.4 m)
  • 140 in
  • (tracks retracted): 35 in | (tracks extended): 49 in | Chip blade (without extensions): 34 in
  • (non-remote unit): 76 in | (remote unit): 85 in
  • on Ground: 47 in (119.4 cm)
  • Volume with Filter 5.3 qt | Lower Gearbox: 1.6 qt
  • Number of Teeth: 27 | Number of wear plates: 6 | Reversible Pockets/Teeth: 24 | System Type: Tandem gear pump, pressure balanced | Switches: Boom swing, boom height, creep propel, ignition, clutch, track gauge, track speed range and throttle, blade | Controller: Danfoss | Display: Multifunction display (MFD) that displays hours, fuel level, engine speed, engine faults and engine status | Shutdown System: High engine temperature and low oil pressure | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate | Type: of Idler Cast | Number of Idlers: 7 | emote Display LCD with remote control and machine functions status
  • 9 gal
  • Engine Option One: 3750 lbs
  • Recommended: Oil 10W-30 | Type - Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended: Vermeer highpower 68
  • Frame Description: Welded tube and plate steel
  • Rubber 7-in width