2024 Vermeer® D100x140 S3 HDD Aplex

Information

2024 Vermeer® D100x140 S3 HDD Aplex

With a maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm, the D100x140 S3 Navigator® horizontal directional drill offers an exceptional one-two punch in response to your most challenging projects. To get you there and back, select between 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm) Firestick® drill rod. Consider the 15 ft (4.6 m) to minimize your footprint, while selecting 20 ft (6.1 m) will offer increased onboard rod carrying capacity.

Features may include:

Firestick drill rod

Experience the difference that has made one-piece, forged Firestick® drill rod the industry benchmark.

Wireless remote-controlled knuckle boom crane

The D100x140 S3 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5’ (6 m), the crane has a rated capacity of 3970 lb (1800.8 kg).

Dual displays

State-of-the-art dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.

Angled, true open-top vises

Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 S3 offers good operator visibility during rod makeup/breakout. The true open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.

Increase your range

Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.

Photos

Highlights

  • Texarkana, Texas
  • 2024
  • Vermeer®
  • D100x140 S3 HDD Aplex
  • Ultra low sulfur diesel
  • Available
  • With Cab: 138 in

Specifications

  • 2024
  • Vermeer®
  • D100x140 S3 HDD
  • Aplex
  • Directional
  • CAT
  • 2200 rpm
  • Gross: 275 hp
  • Twin turbocharged
  • Max Fuel Consumption: 15 gph
  • Ultra low sulfur diesel
  • Thrust: 100000 lbs | Pullback: 100000 lbs
  • Maximum Carriage Speed at Maximum Engine RPM: 175 ft/min | Maximum Spindle Torque (Low at Maximum Engine RPM): 14000 ft-lb | Maximum Spindle Torque (Medium at Maximum Engine RPM): 10500 ft-lb | Maximum Spindle Torque (High at Maximum Engine RPM): 7000 ft-lb | Maximum Spindle Speed at Max Engine RPM: 215 rpm | Maximum Ground Drive Speed at Maximum Engine RPM: 2.8 mph
  • At Operator's Ear - 15 ft (4.6 m): 82 dB(a) | at Operator's Ear - 20 ft (6.1 m): 84 dB(a)
  • Maximum: 200 gpm
  • 1000 psi
  • Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 25 / Left/Right: 25 | Drill Rack Angle: 24 deg | Rotation: 360 deg | Maximum Reach: 234 in
  • Minimum - 15 ft (4.6 m): 376.8 in / 20 ft (6.1 m): 436.8 in
  • Minimum: 102 in | With Cab, Minimum: 102 in
  • Minimum: 138 in
  • With Cab: 138 in
  • Minimum Diameter: 6 in
  • 115 gal
  • Maximum: 5070 lbs | Maximum - Boom Extended/Max Reach: 3970 lbs
  • Tank: 80 gal | System: 120 gal
  • 15 ft (6.1 m): 50300 lbs | 20 ft (6.1 m): 52500 lbs | (Cab Option) - 15 ft (4.6 m): 49800 lbs | (Cab Option) - 20 ft (6.1 m): 57220 lbs
  • Automated Rod Loader: Semi-automated | Brand: Aplex | Breakout System: Open top vise