2024 Vermeer® T1155III Tier 4 Final

Information

2024 Vermeer® T1155III Tier 4 Final

The T1155 Commander® 3 trencher is the perfect trenching machine to penetrate rock. It’s the ideal combination of heavy-duty construction, 540 hp (403 kW) from the turbocharged Caterpillar C15 ACERT Tier 3 or Tier 4 Final engine and sophisticated electronics.

Features may include:

SmartTEC computer-aided control system

Keep your construction site running smoothly with the exclusive Vermeer SmartTEC computer-aided control system.

Standard remote

Decrease trencher teeth inspection and replacement maintenance time through an standard remote control that can start or stop the engine, raise or lower the trencher boom and rotate chain at a slow speed.

Elevated cab

Enhance productivity with an elevated cab providing a better view of the boom, trench and conveyor.

Rotary power trencher drive motor

A rotary power trencher drive motor and splined headshaft produce a lower speed and higher torque which provide superior ground penetration and low chain wear for better production results.

Photos

Highlights

  • Texarkana, Texas
  • 2024
  • Vermeer®
  • T1155III Tier 4 Final
  • C15 ACERT
  • Available
  • Ranges: 118"-120" (292.1 cm - 304.8 cm) | belt: 30 in
  • Range: 146" (370.8 cm) | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)

Specifications

  • 2024
  • Vermeer®
  • T1155III
  • Tier 4 Final
  • Ditchers
  • C15 ACERT
  • Caterpillar
  • Tier 4 Final
  • Gross: 540 hp
  • 2100 rpm
  • 6
  • Dry-type with precleaner
  • Turbocharged and air-to-air aftercooled
  • Medium: Liquid
  • Full Flow
  • Fuel Consumption at Full Load: 28.1 gph
  • Track Drive Type: Dual path hydrostatic with planetary transmission
  • spring-applied, hydraulic release, wet disc brake
  • Service: Hydrostatic
  • System: 24 Volt DC
  • Operating Range: 9.6 hours
  • Maximum Ground Speed - Low: 50 ft/min | Conveyor Belt Speed Range: 0-1070 fpm | Maximum Ground Speed - High: 133 ft/min
  • Minimum: 13 psi / Maximum: 17.3 psi
  • Setting: 2500 psi
  • Pump Flow at Maximum RPM: 27.9 gpm
  • pressure-and-flow-compensated (load-sensing)
  • Approach Angle: 16 deg | Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Conveyor Shift Distance Range: 65" and 125" (165.1 cm and 317.5 cm)
  • Range: 146" (370.8 cm) | Discharge Range: 72" or 86" (182.9 cm or 218.4 cm)
  • with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom: 37.3 ft / with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom: 39.8 ft / with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom: 42.3 ft / with 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar): 43 ft / with 50" (127 cm) End Idler and 16 ft (4.88 m) Boom (with Restraint Bar): 45.3 ft | track: 177.5 in | conveyor: 168" or 228" (426.7 or 579.1 cm)
  • Ranges: 118"-120" (292.1 cm - 304.8 cm) | belt: 30 in
  • Pad Ranges: 26" (66 cm), 28"(71.1 cm), 30" (76.2 cm)
  • 270 gal
  • 152 gal
  • Range: 120,000 lb - 170,000 lb (54,431.1 kg - 77,110.7 kg)
  • Track Size: CAT 350 Excavator | Control System: TEC Plus with SmartTEC
  • Pad: Single, double or triple grouser
  • Belt Style: Cleated or finger type | Style: Curved
  • Direction: Right or left
  • Vermeer HyPower 68 or Vermeer HyPower 100