2024 Vermeer® T955III Tier 3

Information

2024 Vermeer® T955III Tier 3

To cut through the most difficult rock trenching conditions around, Vermeer offers the T955 Commander® 3 trencher. Equipped with a Caterpillar C13 ACERT Tier 3 turbocharged diesel engine, the T955III boasts 415 hp (310 kW). Due to the high-torque rise engine, when you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through. With a rugged D6 track chain and a sectionalized trencher boom allowing customized trench depths, the T955III also brings heavy equipment strength and versatility to your construction site.

Features may include:

Low-speed, high-torque motor

Use the trenching machine more effectively with less wear due to its low-speed, high-torque, splined headshaft motor.

Standard remote

Decrease trencher teeth inspection and replacement maintenance time through a standard remote control that can start or stop the engine, raise or lower the trencher boom and rotate the chain at a slow speed.

Extra wide conveyor opening

Promote high-volume spoil removal with an extra-wide 30-in (76.2-cm) dirt conveyor opening that helps reduce jamming.

Rotary power trencher drive motor

A rotary power trencher drive motor and splined headshaft produce a lower speed and higher torque which provide superior ground penetration and low chain wear for better production results.

Photos

Highlights

  • Texarkana, Texas
  • 2024
  • Vermeer®
  • T955III Tier 3
  • C13 ACERT
  • Available
  • Ranges: 114" (289.6 cm) | Belt: 30 in
  • Range: 133" (337.8 cm) | Discharge Range: 62" - 76" (157 cm - 193 cm)

Specifications

  • 2024
  • Vermeer®
  • T955III
  • Tier 3
  • Ditchers
  • C13 ACERT
  • Caterpillar
  • Tier 3
  • Gross Horsepower: 415 hp
  • 2100 rpm
  • 6
  • Dry-type exhaust aspirated
  • Turbocharged and air-to-air aftercooled
  • Medium: Liquid
  • Full flow
  • Fuel Consumption at Full Load: 20.9 gph
  • Track Type: Dual path hydrostatic with planetary transmission
  • and Emergency: spring-applied, hydraulic release, wet disc brake
  • Service: Hydrostatic
  • System: 24 Volt DC
  • Range: 8.8 hours
  • Maximum Ground - Low: 68 ft/min | Maximum Ground - High: 136 ft/min | Conveyor Belt Range: 0-1070 fpm (0-326 m/min)
  • Minimum: 11.7 psi | Maximum: 13.3 psi
  • Setting: 2500 psi
  • Flow at Maximum: 27.9 gpm
  • pressure-and-flow-compensated (load-sensing)
  • Approach Angle: 16 deg | Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg | Conveyor Shift Distance Range: 5" or 65" (12.7 cm or 165.1 cm)
  • Range: 133" (337.8 cm) | Discharge Range: 62" - 76" (157 cm - 193 cm)
  • with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 32.2 ft / with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 34.7 ft | with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 37.2 ft | with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 39.7 ft | Track: 161 in | Conveyor: 108" or 168" (274.3 cm or 426.7 cm)
  • Ranges: 114" (289.6 cm) | Belt: 30 in
  • Pad Ranges: 24" (61 cm)
  • Tank: 184 gal
  • Tank: 152 gal
  • Range: 78,000 lb - 109,000 lb (35,380.2 kg - 49,441.6 kg)
  • Track Size: D6 | Control System: TEC Plus with SmartTEC
  • Pad: Single, double or triple grouser
  • Belt Style: Cleat or finger type | Conveyor Style: Curved
  • Vermeer HyPower 68 or Vermeer HyPower 100
  • Direction: Right or left