2024 Vermeer® Trommel Screens TR6400

2024 Vermeer® Trommel Screens TR6400

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model Trommel Screens
  • Engine Model: 3.6L
2024 Vermeer® Trommel Screens TR6400

2024 Vermeer® Trommel Screens TR6400

2024 Vermeer® Trommel Screens TR6400

The TR6400 trommel screen was designed with toughness, compactness and ease of maintenance in mind. The 100 hp (75 kW) Deutz Tier 4 Final engine, combined with a 6 ft (1.8 m) by 20 ft (6.1 m) drum is ideal for topsoil, compost and woody biomass applications.

Features may include:

Deutz 3.6L Tier 4F (Stage IV) engine

The Deutz 3.6L Tier 4F (Stage IV) engine meets all U.S., Canada and European Union tier/stage regulations.

Drum service access

A single large drum door along the side and entry from the end provide superior drum service access.

Low hopper height

A low hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.

Quick change drum

Efficiently change product size by exchanging drums

Quick change screens

Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that requires frequent screen changes. The design also creates a smooth exterior on the drum, reducing the amount of brush wear.

Square lift bars

Square lift bars inside the drum enable more material to be carried at a slower drum speed helping decrease fuel consumption and premature wear.

Swing-out engine bay

A single large access door provides engine service access.

Tensioned screens

Compatibility with smaller gauge wire increases the open screen area thus overall production of the machine, particularly in applications when processing wetter materials.

Vermeer ACS control system

These control systems offer the operator flexibility when operating from the machine or cab of the loader. Operators can also adjust conveyor height from the remote, providing the ability to keep them low to the ground to reduce blowing of material.

Engine

Engine Manufacturer Deutz
Engine Model: 3.6L
Emissions Tier 4F (Stage IV)
Cylinder Liners 4
Engine Power Rating: 100 hp (74.5 kW)
Oil Filter Spin-on
Air Cleaner Dual element

Motor

Displacement Drum: 35.5 cu in (581.7 cu cm) displacement | Conveyor: 14.2 cu-in

Fuel System

Fuel System Fuel Consumption: 3 gph (11.4 L/h)

Suspension

Suspension Leaf spring

Wheels & Tires

Tires, Rear Specification 445/50 R22.5

Battery

Battery 950 CCA

Electric

Electrical System Voltage: 12 V, 120 amp alternator

Operational

Operating Speed Apron Conveyor: 0-15 fpm | Drum: 0-25 rpm | Collecting Belt: 360 ft/min | Fines Belt: 400 ft/min

Hydraulics

Hydraulic Pump 77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar) | Drum Operation: 0-33.1 gpm (0-125.3 L/min)

Chassis

Frame Type Four independent hydraulic jacklegs | Fines Conveyor Frame: Part of trailer frame / Engineered structural frame

Dimensions

Dimensions Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 30 deg | Hopper Opening: 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | Drum Diameter: 6.5 ft | Thrust Bearing Diameter: 4 in | Thrust Bearing Face: 2 in | Brush Diameter: 14 in | Brush Assembly Support: Two 1.25 in (3.2 cm) sealed ball bearings/brush | Head/Tail Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.75 in (4.4 cm) double roller | Tail Pulley Takeup: 6 in | Self-Cleaning Return Idlers: 4 in (10.2 cm) rubber disk x 3 | Head Pulley Type: 8 in (20.3 cm) crowned | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Self-Cleaning Tail Pulley Dimensions: 8 in diameter, 38 in wide, crowned wing pully | Head Pulley Takeup: 8 in | Drum Angle Adjustability: 0-5 deg | Conveyor Belt Type: 220 lb (99.8 kg), 2 ply, 2/6" x 1/16" (4.8 mm x 1.6 mm)
Transport Length 40 ft
Transport Width 99 in
Transport Height 13.1 ft
Length Operation: 54 ft | Apron Conveyor: 12.4 ft | Drum: 20 ft | Collecting Conveyor: 16 ft | Fines Conveyor: 23.5 ft
Width Operation: 295 in | Apron Opening: 37.5 in | Apron Conveyor Belt: 42 in
Height Operation: 16.7 ft | Apron Opening: 45 in | Hopper: 9.5 ft (2.9 m) from ground level at operating incline | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg)
Hopper Width Bottom: 37.5 in
Conveyer Width Belt: 36 in

Capacities

Fuel Capacity Tank: 50 gal
Oil capacity Oil Volume with Filter: 10 qt
Hydraulic Capacity Tank: 80 gal | 6.5 cu yd
Volume Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%

Weights

Weight 37000 lbs | Hitch: 4200 lbs

Features

Features Radiator Fan: Suction | Apron Conveyor Rollers: 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | Drum Support Description: 8 polyurethane trunnion wheels on pivoting bogeys 8 od x 4 in wide (20.3 x 10.2 cm) | Drum Drive Chain: 140 extended pin/extended width | Maximum Screen Panels: 8 | Rubber Flashing: Adjustable corded rubber | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers | Axle: Leaf spring
Oil Type Recommended: Mobil 15W40
Construction Material Bristle: Polyethylene

Product Photography