2024 Vermeer® BC1000XL Tier 4 Final 74 hp
- Year 2024
- Make Vermeer®
- Model BC1000XL Tier 4 Final
2024 Vermeer® BC1000XL Tier 4 Final 74 hp
2024 Vermeer® BC1000XL Tier 4 Final 74 hp
Enhanced with the modern day operator in mind, the BC1000XL is available with either a Tier 4 Final 49-hp or 74-hp (36.4-kW or 55-kW) engine that meets all the latest emission regulations. When transporting the machine, expect smooth towing thanks to the rubber-torsion suspension.
Features may include:
25-gal (94.6 L) fuel tankKeep up the pace because the BC1000XL comes with a 25-gal (94.6 L) fuel tank that lets you put in more hours before refueling.
Minimized maintenanceMinimize maintenance because once the shield is opened, belts can be changed without tools, and the clutchless PTO system eliminates the need to slide the engine.
Patented bottom feed stop barProvides operator safety with the patented bottom feed stop bar. The four-position upper feed control bar with dual stop positions and forward/reverse feed positions mounts over the feed table and enables the operator to stop the feed rollers and select forward or reverse operations.
Engine
Engine Manufacturer
Deutz | Linkbelt | Option One: Dexter
Displacement
D2.9L
Emissions
Tier 4 Final
Cylinder Liners
4
Engine Power
Maximum: 74 hp
Engine Torque, Maximum
181 ft-lb
Air Cleaner
2-stage dry with safety element
Oil Filter
Spin-on
Cooling
Medium: Liquid
Bore
2.4 in
Motor
Displacement
28.3
Motor Type
Manufacturer: White
Fuel System
Fuel System
Max Fuel Consumption: 4.6 gph
Fuel Type
Diesel
Drivetrain
Clutch
Clutchless PTO | Drive Engagement: Belt tensioner
Suspension
Suspension
Torsion
Wheels & Tires
Tires, Rear Specification
Option One: ST235/80/R16 Load Range E
Battery
Battery
Group 31; 950 CCA
Electric
Electrical
System Voltage: 12 Volt
Alternator
95 Amp
Operational
Operating Speed
Feed: 105 ft/min | 2050 rpm
Operating Conditions
Actuation Force: 34 lbs
Hydraulics
Hydraulic Type
System Type: Tandem center
Hydraulic Pump
Flow at Maximum RPM: 2.7 gpm
Maximum Pressure
System relief: 2500 psi
Chassis
Chassis
Tongue Description: 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) / Extension: Extendable 24" (61 cm) @ 12" (30.5 cm) increments
Frame Type
7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
Hitch/Type
Pintle
Lights and Safety
Lighting
Trailer Type: LED
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 30 deg | Feed Roller Minimum Distance to Drum: 1 in | Feed Roller: 20" x 17" (50.8 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 66.5 in | Distance from Feed Table to Ground: 26 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Material Capacity: 12 in | Thickness: .4 in | Diameter: 20 in | Knife Thickness: .6 in | Knife Size: 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Chute Rotation Angle: 270 deg |
Length
Feed Table Up, Tongue In: 160 in | Table Down, Tongue Extended: 208 in | Infeed Table: 32 in
Width
66.5 in | Infeed Table: 52 in | 20 in | Infeed Throat Capacity: 17" (43.2 cm)
Height
101 in | Infeed Hopper: 12 in | Chute: 101 in | Infeed Throat Capacity: 12" (30.5 cm)
Fan Diameter
18.625" (47.3 cm) suction
Wheels
Option One: 16" (40.6 cm)
Capacities
Fuel Capacity
25 gal
Oil capacity
Volume with Filter: 8.4 qt
Cooling System
13.3 gal
Features
Dynamic: 31400 lbs | Static: 53500 lbs | Option One: 5200 lb (2358.7 kg)
Load Capacity, Land
Feed Roller Clamp Load: 350 lbs
Hydraulic Capacity
7 gal
Weights
Weight
Option One: 4995 lbs | Tongue - Option One: 600 lbs | Of Feed Roller: 400 lbs | With Shaft: 460 lbs
Features
Features
Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Number of Feed Roller Motors: 1 | Reset Method: Green hold-to-run button | Positions: 4: E-stop, forward, neutral and reverse | Safety Lock - Number of Positions: 2 | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Type: Spherical rollers | Rotation Type: Rotation handle with pin lock | Filtration Method: 10 micron return; 100 micron suction | Gauges: MFD, hour | Switches: Feed Stop Bar Sensitivity, Droop, Ecoldle | Controller: Vermeer ACS | Display: Multifunctional display (MFD)
Oil Type
Recommended: 10W30 | hydraulic Recommended: Vermeer VMF
Construction Material
A8 chipper steel | Bedknife: 1018 | Fender Description: Bolt-on-steel
Belt Type
5V
Knife Quantity
2 | Number of Bolts/Knife: 4