2024 Vermeer® BC1800XL Tier 4 Final John Deere 4045HFC09
- Year 2024
- Make Vermeer®
- Model BC1800XL Tier 4 Final
- Engine 4045HFC09
2024 Vermeer® BC1800XL Tier 4 Final John Deere 4045HFC09
2024 Vermeer® BC1800XL Tier 4 Final John Deere 4045HFC09
When the jobsite calls for large-diameter chipping, look to the Vermeer BC1800XL brush chipper. Built with strength for demanding conditions, the BC1800XL possesses the power and features needed for land-clearing and tree care operations.
The BC1800XL is now available with a John Deere Tier 4 Final engine with 173 hp (129 kW). Other standard features include the patented SmartFeed control system, EcoIdle™ engine control system, Tree Commander™ remote control and bottom feed stop bar for increased operator safety.
Features may include:
Vertical feed rollersReduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.
Improved operator safetyProvides operator safety with a 62.5-in (158.8-cm) long feed table for extra distance and exclusive bottom feed stop bar system.
Tree Commander remote controlWith the standard Tree Commander remote control, jobsite productivity is improved by allowing the operator to control brush chipper functions remotely.
Engine
Engine Manufacturer
John Deere | Linkbelt | Option One: Dexter
Engine
4045HFC09
Cylinder Liners
4
Engine Power
Gross (Maximum): 173 hp
Engine Torque, Maximum
492 ft-lb
Air Cleaner
2 Stage Dry
Oil Filter
Spin-on
Cooling
Medium: Liquid
Bore
2.9 in
Motor
Displacement
28.4
Motor Type
Manufacturer: White RE470
Fuel System
Fuel Type
Diesel
Drivetrain
Clutch
12" Spring Loaded | Drive Engagement: Manual Lever
Suspension
Suspension
Torflex
Wheels & Tires
Tires, Rear Specification
Option One: 235/75R17.5 load range H
Brakes
Brake System Type
Electric
Battery
Battery
950 cca
Electric
Electrical
System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Controller: Vermeer ACS: CB02 | Shutdown System: High temp, low pressure
Alternator
90
Operational
Operating Speed
Feed: 117 ft/min | drum: 1100
Operating Conditions
Rope Line Pull: 2000 lbs
Hydraulics
Airflow
3544 cfm
Hydraulic Type
System Type: Open Center
Hydraulic Pump
Pump Flow at Maximum RPM: 6.3 gpm
Maximum Pressure
System relief: 2800 psi | Auto Reverse: 2400 psi | Winch Relief System: 3000 psi
Chassis
Chassis
Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
Frame Type
7" x 2.13" Channel
Hitch/Type
Pintle
Lights and Safety
Safety Features
Trailer Light Type: LED | Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 30 deg | Feed Roller Dimension: 23.5" x 18 | Feed Roller Dimension (Two): 23.5" x 18 | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | diameter: 2 in | Material Thickness: 11 in | Material Capacity: 19 in | Thickness: 26.1 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .3 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Winch Rope: 7/16" | Rope Choker: 1/4"
Length
Feed Table Up, Tongue In: 177 in | Table Down, Tongue Extended: 231 in | Infeed Table: 36 in | Rope: 150 ft
Width
78.5 in | Infeed Table: 67 in | drum: .5 in
Height
107 in | Infeed Hopper: 34 in | Chute: 110 in
Fan Diameter
26" Suction
Wheels
Option One 17.5" x 6.75" BC of 8 on 6.5"
Capacities
Fuel Capacity
35 gal
Oil capacity
Oil Volume with Filter: 15.5 qt
Cooling System
Coolant Capacity (Engine and Radiator): 32 gal
Load Capacity, Land
Feed Roller Clamp Load: 380 lbs
Features
Dynamic: 41800 lbs | Static: 71500 lbs | Capacity - Option One: 10,000
Hydraulic Capacity
Tank: 12 gal
Weights
Weight
Without winch and hydraulic jack: 9600 lbs | with winch, hydraulic jack and hydraulic chute: 10366 lbs | of Feed Roller: 116 lbs | With Shaft: 1160 lbs
Features
Features
Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Number of Paddles: 12 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | Cutter Drive - Type: Spherical roller | Switches: Control Panel: Ignition, throttle, Smartfeed, exhaust regeneration, and ECOIdle. Rear: Lower feed bar sensitivity | Controller: Vermeer ACS: CB02 | Display: MFD | Shutdown System High temp, low pressure, | Radio Remote Control: Tree Commander | Type - Option One: Rubber Torsional | Winch Controls: Forward, Reverse, Free Spool
Oil Type
Recommended: ACEA E-7 & E-6 or API CI-4 | Recommended hydraulic: Vermeer VMF
Construction Material
A8 Modified Chipper Steel | Bedknife: 1018 CD | Winch Boom Structure: 0.25 GR50
Knife Quantity
11 / (2): 11 | 4 | Number of Bolts/Knife: 5
Belt Type
Belt Idler/Tensioner: Spring loaded | 5V