2024 Vermeer® BC900XL 900XL
- Year 2024
- Make Vermeer®
- Model BC900XL
2024 Vermeer® BC900XL 900XL
2024 Vermeer® BC900XL 900XL
Able to chip heavily branched material up to 9 in (22.9 cm) in diameter and 14 in (35.6 cm) wide, the BC900XL is ideal for line clearing and general cleanup needs. In combination, the Vermeer-exclusive SmartFeed system, and its 35 hp (26.1 kW) Briggs and Stratton gas engine, pulls in and processes difficult material.
Features may include:
SmartFeed systemProtect your engine with the SmartFeed system, which monitors engine speed and stops or reverses the feed rollers if needed.
Bottom feed stop barProvides operator safety with the patented bottom feed stop bar. The four-position upper feed control bar with dual stop positions and forward / reverse feed positions mounts over the feed table and enables the operator to stop the feed rollers and select forward or reverse operations.
1-year/1,000-hour limited warrantyProtect your investment with a 1-year/1,000-hour limited warranty.
Engine
Engine Manufacturer
Briggs and Stratton Vanguard | Linkbelt | Option One: Dexter | Option Two: Dexter
Engine Power
Gross Horsepower (Maximum): 35 hp
Engine Torque, Maximum
53 ft-lb
Air Cleaner
Engine-mounted
Cooling
Medium: Air
Airflow
3925 cfm
Bore
2.2 in
Oil Filter
Spin-On
Motor
Displacement
33.1 CID
Motor Type
Manufacturer: White
Fuel System
Fuel System
Max Fuel Consumption: 3.2 gph
Fuel Type
Gasoline
Drivetrain
Clutch
Drive Engagement: Clutchless PTO
Suspension
Suspension
3500 lb (1587.6 kg) | Option Two: 3500 lb (1587.6 kg) with electric brakes
Wheels & Tires
Tires, Rear Specification
Option One: ST215/75R14
Battery
Battery
Group 24 - 580 CCA
Electric
Alternator
20 amp
Electrical
System: 12 V
Operational
Operating Speed
Feed: 140 ft/min | 1500 rpm
Operating Conditions
Actuation Force (BFSB): 34 lbs
Hydraulics
Hydraulic Type
System Type: Tandem Center
Hydraulic Pump
Pump Flow at Maximum RPM: 5 gpm
Maximum Pressure
System relief: 2500 psi | Auto Reverse PSI: 2300 psi
Chassis
Chassis
Tongue Description: 3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube
Frame Type
3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm)
Hitch/Type
Pintle or ball | Option One: Rubber torsional | Option Two: Rubber torsional
Dimensions
Dimensions
Feed Roller Dimension: 15.8" dia (40 cm) | Infeed Throat Capacity: 9 in x 14 in (22.9 cm x 35.6 cm) | Pinch Point - Distance to End of Feed Table: 65 in | Distance from Feed Table to Ground: 29 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 9 in | Thickness: 1 in | Diameter: 33 in | Knife Thickness: .6 in | Knife Size: 5" x 11.75" (12.7 cm x 29.8 cm) | Bedknife Size: 5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical | Bedknife Thickness: .8 in | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg
Length
Feed Table Up, Tongue In: 140.4 in | Feed Roller Dimension: 13.5" (34.3 cm) | Table Down, Tongue Extended: 154.8 in | Infeed Table: 26 in
Width
79.5 in | Infeed Table: 48 in
Height
97 in | Infeed Hopper: 32 in | Chute: 96.7 in
Wheels
Option One: 14" (35.6 cm)
Capacities
Fuel Capacity
16 gal
Oil capacity
Oil Volume with Filter: 2.9 qt
Load Capacity, Land
Feed Roller Clamp Load: 560 lbs
Features
Dynamic Capacity: 31400 lbs | Static: 53500 lbs | Capacity - Option One: 3500 (1587.6 kg)
Hydraulic Capacity
6.8 gal
Weights
Weight
Option One: 3060 lbs | Tongue - Engine Option One: 320 lbs | Of Feed Roller: 210 lbs | With Shaft: 330 lbs
Features
Features
Feed Roller Orientation: Horizontal | Number of Feed Rollers: 1 | Feed Roller Clamp Type: Spring/weight | Number of Feed Roller Motors: 1 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, stop and reverse | Safety Lock - Number of Positions: 6 | Useable Edges: 2 | Number of Paddles: 2 | Fixture Method: Bolt-on | Bedknife - Number of Useable Edges: 2 | Number of Bearings: 2 | Rotation Type: Manual dual handles with pin lock | Filtration Method: 10 micron return | Fender Description: Bolt-on | Cutter Drive - Type: Dual spherical roller | Controller: Vermeer ACS | Shutdown System: Engine
Oil Type
Recommended: 10W30 | Vermeer VMF Gold
Construction Material
A8 chipper steel | Bedknife: Grade 50
Belt Type
Chipper - Polyester Cord with wrap
Knife Quantity
12 | 2 | Number of Bolts/Knife: 5